About Pocatalico River Road Truss Bridge
The Pratt through truss was constructed in 1899 by the Canton Bridge Company of Canton, Ohio, with steel sourced from the Carnegie Steel Company. [1] It featured cut stone abutments and V-lacing throughout the structure.
The Canton Bridge Company was founded in 1892 by Canton native John R. Reed and grew into a large regional bridge company before being purchased by the American Bridge Company in the early 20th century. 2 The Pratt truss was one of the most widely used truss types in West Virginia during this era. Since its introduction in 1844, the design was used in hundreds of bridges built up until World War II. It was designed by American engineers Thomas Willis Pratt and his father, Caleb Pratt, just a few years after William Howe patented his famous Howe truss design. The Pratt truss quickly gained popularity as bridge construction shifted from wood components toward all-steel designs. Its most compelling feature was its ability to span great distances using simple construction methods, regularly reaching up to 250 feet between anchor points.
There were relatively few modifications to the bridge over the decades. Some structural members were replaced in 1987, and the wooden deck was replaced numerous times over the years. 2 Because of the structure’s deterioration, it was not feasible to renovate the bridge to maintain proper load limits, and work on a replacement bridge began in 2023. which was completed in 2025.
Structure
Dimensions & Classification
| Structural Form | Through Truss — Pratt |
|---|---|
| Primary Material | Steel |
| Total Length | 103' |
| Main Span | 98' |
| Deck Width | 11'8" |
| Vertical Clearance | 12'9" |
| Connections | Pin-connected |
| Builders | Canton Bridge Co. |
Photographs







Suggest a Correction
Spotted an error — a date, name, or fact? Send a correction and I'll review it.
Sources & Citations
References for this location, in MLA format.
Comments